Everything you need to know about the Fender 1957 Stratocaster

Written by Zac DelVecchio

There are some years and models in the guitar Parthenon that need no introduction. As players and gear lovers, we have instinctually been brought up to know these years are “the special years”. Today’s topic will be one of those legendary models, the 1957 Stratocaster. This Stratocaster often needs no introduction on its importance, but have you ever stopped to wonder why this year? What makes this particular guitar so special? Well, sit back and let’s get into what makes this Fender tick. 

From Ash to Alder

It’s hard to believe a guitar shape so iconic hasn’t been around since the dawn of time! Only three years before in the spring of 1954, the Fender Stratocaster entered the world. The first three years of the Stratocaster’s life it existed as an ash body. Ash is widely known for its pleasant-sounding lows, scooped mids and nice top end. Upon 1957 (technically mid-1956, but close enough for rock and roll as they say) Fender changed the Stratocaster’s tonewood to Alder. This new at the time tonewood produced a much fuller sound with more mids, slightly deeper lows and maintaining a clean, clear top end. 

The Original V Neck:

Despite what the hipster’s think, the 1957 Stratocaster made the V neck cool. Before this year Stratocaster necks were a larger club-like D shape and progressively became more V-shaped over the next few years. Upon 1957, the neck shape changed further making that subtle V into a deep pronounced V shape. This became a favorite of artists such as Eric Clapton. 

Other notable features of this 7 ¼” radius maple neck include the now-famous butterfly string trees (previous years featured a round tree) and fiberboard like material for dot inlays

This was the last year of the defined V neck as it was replaced later on in 1958 with a new shape and Brazilian rosewood fingerboards became an option. 

An interesting note about the logo at the time is that from 1954-1960 the Fender logo on the headstock only featured the infamous “Original contour body” and “with synchronized tremolo” badges. As the years would go by patent numbers would continue to be added to the logo under the “with synchronized tremolo” waterslide decal. 

The serial number was at the time on the neck plate securing the neck to the body and were in the 16000-25000 range with some featuring a “0” or “-” before the number.

Hot Hardware

With a block made out of grey painted steel and saddles made of a piece of steel bent into shape with the words “Fender Pat Pend” on each saddle the Fender tremolo system altered history forever. These tremolos were designed to be floating, but many would often block the bridge in the back with a piece of wood to “convert” it to a standard stop tail feel. 

The tuning pegs at the time were the single-line Kluson Deluxe tuners which featured a “D number” patent as seen from the underside of the tuner.

ABS plastic replaced the original Bakelite like material in 1957 as well. Bakelite was a much more brittle material and could not endure as much as ABS could. The pickguards at the time were also a simple white ABS plastic guard that was made of only one layer unlike its multi-layer siblings to come in just a few years.

It’s Electric

Originally, the Stratocaster had a 3-way CRL switch. Interesting enough, players often discovered the “secret menu options” of the in-between switches by forcing the switch to an in-between position giving birth to the later created 5-way switch.

The 250K knurled split shaft pots were made by Stackpole and the wires were cloth wires at the time which had a wax coating. 

The capacitors were flat box-shaped paper caps which were ZNW1P1 .1 MFD 150VDC capacitor

The pickups on these instruments were wrapped with a 42GA heavy formvar wire on a distinctive black bottom made of fiberboard. The magnets were AlNiCo V and the pickups were potted for microphonic feedback. 

Case it Up 

With its suave red plush lining and lacquered tweed exterior the Side Pocket Tweed case was what was used on the 1957 Stratocaster. Unlike its predecessors which had the pick case in the center which acted as storage and neck support, the Side Pocket Tweed had the pick case moved next to the neck and featured a “Koylon” tag to show the maker’s brand. 

The exterior of this case featured brown leader caps and In 1957 only these cases featured a Fender logo made of foil on the outside which is notorious for falling off over time. Any case that has this still on it is near-mythical in rarity. 

Let’s Finish This Up in Style:

Now taken for granted, the sunburst featured on these Stratocasters at the time turned heads. First dipped into a yellow stain, the Stratocaster was then sprayed with the black and red to produce the now-classic look. The guitar was then finished in nitrocellulose lacquer

The paint at the time was coming from DuPont who was a well know paint manufacturer for many products outside the music industry such as automobiles. It is because of this that Fender’s custom colors which were available for an extra 5% of the value are the same as many car finishes such as Sonic Blue or Olympic White.

62 years later the 1957 Stratocaster is continuing to inspire players of all ages and styles. It will no doubt continue to spark our imaginations and creativity for many years to come. 

If you enjoyed this content please consider supporting us by becoming a Guitar Connoisseur Patron

You can also visit our Digital Downloads section to purchase a High Resolution Digital Ebook of any of our past issues.

Leave a Reply

Your email address will not be published. Required fields are marked *